Posted on 2016-02-22 by Author admin
While having a conveniently functioning garage door opener is actually a good deal, having a sophisticated remotely controlled garage door could be your best gem of convenience with your garage door in Sacramento. Understanding how to program garage door opener over network is the only thing standing between you and the phenomenal experience as well as convenience. To shove this barrier out of your way we have prepared a detailed and systematic guide that will see you enjoy opening and closing your garage door using your smart computerized gadgets.
The first thing you need to do is understand your garage door opener and the garage door sensors that would be compatible with the kind of program that you intend to use Determining the design of your garage door, the type of sensor it requires and the compatible application needed will enable you to enjoy the full benefit of having a programmed garage door opener. You will not be a victim of demoralizing situations such as having a program that can only detect when the garage door is open or closed but it cannot control its opening and closing. You cannot afford to ignore the importance of durable and reliable garage door cables while preparing to program garage door opener over network.
While explaining how to program garage door opener over network the importance of smoothly working garage door rollers is critical. They facilitate a sooth movement of the garage door during the opening and closing. You do not want to hear deafening noise every time you open your garage door.
For instance, you may choose to use My Q Garage application.
This will require you to ensure that the rooter at your home is well set with the Wi Fi hub. Secondly, you need to have My Q Garage application downloaded on your iPod or smart phone.
Now, you are ready to begin: Begin by programming the garage door sensor.
How do you do that? It is easy. You will follow the steps provided on My Q Garage application.
Be sure to turn on the Wi-Fi hub release button. For the first door programming use button labelled 1 on the Wi-Fi hub.
Press it once so that it turns Yellow Led. Turn on the door sensor by pressing it once. This will see the Wi-Fi hub Led light flash and then go off. You can now program the Wi-Fi centre to the garage door opener.
At this juncture you follow the following steps simultaneously with the use of My Q Garage application:
Press the settings knob once. It will turn Blue Led
Press and continue holding the settings button. Release when Yellow and Green Led blink in turns.
Press the setting knob again. It will turn Yellow Led Press the settings knob again. You will see Led Green and Yellow blink alternately.
On the program knob on the door sensor press and hold to turn it on
Press the button 1 and repeat the pressing on the Wi-Fi hub. This will see the garage door activated.
You can now exit the programming mode by pressing the setting knob and connect to the Wi-Fi.
The connection is guided by the following colors which indicate various levels of connection. When it blinks Blue, it means it’s ready to connect while when it blinks Green it means it is attempting and when it turns solid Green it means it has fully connected to the Wi-Fi. You now know How to program garage door opener over network. Enjoy the experience.
For more onto Garage Door Opener visit Sacramento Garage Door Masters and have a hassle free garage door opener repair and maintenance.